
About erstophob Marine Protect
Highly resistant surface protection
erstophob Marine Protect is a transparent, ready-to-use coating solution for protecting smooth, non-absorbent surfaces from:
-
Graffiti
-
contamination
-
weathering
-
moisture exposure
-
Corrosive environmental influences
Based on a patented polysilazane technology, erstophob Marine Protect creates a permanent barrier layer with a chemical bond to the substrate. Curing occurs even under the influence of humidity at room temperature.

Typical areas of application

Designed for Demanding Environments
The technology was specifically developed to meet high demands:
-
Marine and transport sectors
-
Rail transport
-
Aerospace
-
Technical facilities
-
Industrial operating environments
-
damp outdoor areas
-
Heavily stressed surfaces
How does the coating help me?
The coating exhibits high resistance to:
-
corrosion
-
abrasion
-
UV radiation
-
Temperature stress
-
Chemical contamination
-
Soiling

Features and benefits
-
Permanent transparent protective film
-
Anti-graffiti function
-
Very good cleanability ("Easy-to-Clean")
-
High weather and UV resistance
-
High chemical resistance
-
Very good adhesion on suitable surfaces
-
High yield
-
Fluorine-free
-
Curing possible at room temperature
-
Multiple cleanings without reapplying are possible within the system limits.
Downloads
Technical Data Sheet Marine
Product application
erstophob Marine Protect is ready to use. Depending on the substrate, it can be applied using, for example:
-
Microfibre applicator
-
Microfibre paint rollers
-
or HVLP spray technology
Typical spray parameters
-
Method: HVLP compressed air
-
Spray gun: e.g. SATA minijet HVLP
-
Working pressure: approx. 2-3 bar
-
Nozzles: 0.8-1.3 mm
The cleaning of the spray equipment can be done, for example, with n-butyl acetate.
Processing instructions:
-
Prepare the surface to be clean, grease-free and dry.
-
Processing temperature approx. +5°C to +30°C
-
Relative humidity approximately 30-80%
-
Typical consumption: approx. 15 ml/m²
Curing:
-
Dust-dry after approx. 1 hour
-
Initial load-bearing capacity after approximately 8-12 hours at room temperature
-
Thermally accelerated curing is possible
-
Full performance after approximately 5-7 days at room temperature