
About erstophob Industrial Protect
Transparent functional protection
erstophob Industrial Protect is a permanent transparent protective coating for smooth and non-absorbent surfaces with special requirements for surface protection, cleaning and corrosion resistance.
Based on functional polysilazane technology, a very thin barrier layer is created that bonds with suitable substrates and protects against dirt, graffiti, weathering and corrosive stresses.

Typical areas of application

Designed for industrial areas
Industrial Protect is particularly interesting where simple cleanability alone is insufficient. Industrial and infrastructure areas are often subject to various stresses simultaneously:
-
moisture
-
pollution
-
UV radiation
-
chemical effects
-
recurring cleaning
-
graffiti
-
corrosive stresses
Industrial Protect combines these requirements in a functional, transparent protective layer.
For which surfaces is the product suitable?
The coating is particularly suitable for smooth and non-absorbent surfaces such as:
-
aluminium
-
stainless steel
-
Steel
-
zinc
-
copper
-
Brass
-
Bronze and other suitable alloys
-
One- and two-component lacquers
-
Polyurethane coatings
-
Epoxy systems
-
Polyester lacquers
-
GRP
-
polished marble
-
polished granite

Features and benefits
permanent transparent coating
functional anti-graffiti protection
pronounced easy-to-clean properties
Corrosion protection on suitable metal surfaces
high substrate adhesion
high UV resistance
high chemical resistance
Protection against dirt and weathering
very thin coating structure
high yield
Cures even at room temperature
Downloads
Technical Data Sheet Industrial
Areas of application & usage notes
erstophob Industrial Protect can be used in a wide range of applications and on suitable materials. Typical applications include:
Tank and industrial facilities
Suitable metal and painted surfaces on industrial equipment can be protected against soiling, weathering, and corrosion. The application must be tested depending on the specific medium, component, and technical application.
Traffic signs and infrastructure
Traffic signs and similar smooth surfaces are constantly exposed to weather, dirt and sometimes graffiti.
Industrial Protect combines surface protection with easy-to-clean and anti-graffiti functionality.
Ventilation and technical systems
On suitable metallic and coated components of technical systems, the transparent barrier layer can facilitate cleaning and functionally protect the surface.
Aluminium rims
Aluminium rims are constantly exposed to brake dust, road dirt, water and other stresses.
Industrial Protect reduces the adhesion of dirt and facilitates ongoing cleaning.
Metal surfaces
Aluminium, stainless steel, steel, zinc, copper and suitable alloys are among the key application areas of this product variant.
Polished natural stone
Selected polished, low-absorbent or non-absorbent natural stone surfaces such as marble and granite may also be suitable for use. Compatibility should be tested beforehand on a sample area.
Application note
Industrial Protect does not require a thick coating. As a technical guideline, the average application rate is approximately 15 ml/m². A thin and even application is crucial. Excessive material usage does not automatically improve the protective effect and should be avoided.
Cures even at room temperature
Industrial Protect reacts under the influence of ambient humidity and can harden even at room temperature.
Under suitable conditions, the surface will be dry to the touch after about one hour.
Weather resistance is typically achieved after about 8 to 12 hours at room temperature.
Full performance develops at room temperature over a period of approximately 5 to 7 days.
For certain metal surfaces, thermal curing can further enhance substrate adhesion.